More From Joey’s Pit-
Setting up to be able to work upright
First need to remove the rusted off bolts that secured the Performer’s horizontal cross brace square tubes. Sprayed them with WD-40, put a vice grip on the rusted bolt and another on the nut and with a little pressure they snapped right off, all four of them.
A photo to remember exactly where the Gas assist tank holder goes before I disassemble it.
For anyone that wold rather replace the bolts with more original starnuts and a bolt, the one that came on the Performer originally is 2 inches.
As I decided to run a threaded rod all the way through the square cross-brace tube and the holes where the bolts I removed was located and then cap the rod off with an acorn nut. Here was the hardware from Ace Hometown Hardware store, Gloucester MA.
4 acorn nuts, 8…
View original post 297 more words